Reading and Clearing Diagnostic Trouble Codes
INSTRUMENT CLUSTER INPUT/OUTPUT CHECK MODENo: 01 - 31:
NOTE: In this mode, it is possible to check the items in the chart above.
NOTE:
- The diagnostic trouble codes are displayed in numerical order. (While performing the inspection, if you want to inspect a diagnostic trouble code number which is smaller than the code number you are currently inspecting, terminate the check mode then repeat the inspection from the beginning.)
- If the speed signal is put into the instrument cluster (the front wheels are rotated) while a code other than DTC 10 is displayed, the input/output check mode will be cancelled.
- The diagnostic trouble codes can be fast forwarded by pushing and holding the odometer/tripmeter switch for 1 second or more.
Operating Order:
Operating Order
Checking Order
NOTE: When inspecting more than two check codes, perform the inspection by following the priority order of inspection indicated in the chart above.