Fuel Injector Removal/Installation

1. Complete the "BEFORE REPAIR PROCEDURE".
2. Disconnect the negative battery cable.
3. Remove the dynamic chamber.




4. Remove in the order indicated below.
1. Plastic fuel hose
(See Plastic Fuel Hose Disassembly Note)
(See Plastic Fuel Hose Assembly Note)
2. Fuel distributor bracket
3. Fuel distributor
4. Fuel distributor insulator
5. Fuel injector insulator
6. Fuel injector
(See Fuel Injector Installation Note)
7. Grommet
8. Pulsation damper No.2

5. Install in the reverse order of removal.
6. Complete the "AFTER REPAIR PROCEDURE".




Fuel Injector Installation Note
1. Use new fuel injector O-rings.
2. Apply a small amount of engine oil to the O-rings and install them into the fuel distributor.
3. Verify that the O-rings and the fuel injector sealing surfaces are free of foreign material.
4. Clean with gasoline if necessary.
5. Install the fuel injectors in the fuel distributor with light twisting motion so that the O-rings will not be folded.