Reading and Clearing Diagnostic Trouble Codes

INSTRUMENT CLUSTER INPUT/OUTPUT CHECK MODE

NOTE: In this mode, it is possible to check the items in the following chart.

DTC 10 - 26:

Diagnostic Trouble Code Chart

NOTE:
- The diagnostic trouble codes are displayed in numerical order. (While performing the inspection, if you want to inspect a diagnostic trouble code whose number is smaller than the code number you are currently inspecting, terminate the check mode then repeat the inspection from the beginning.)
- If the speed signal is put into the instrument cluster (the front wheels are rotated) while a code other than DTC 10 is displayed, the input/output check mode will be cancelled.
- The diagnostic trouble codes can be fast-forwarded by pushing and holding the odometer/tripmeter switch for 1 second or more.
- Diagnostic trouble codes which are not listed may be indicated, but they cannot be inspected.

Operating Order:

Operating Order

Checking Order:

Checking Order

NOTE: When inspecting more than two check codes, perform the inspection by following the priority order of inspection indicated in the chart.