With New Generation Star Tester (NGS)

After-Repair Procedure
1. Clear the diagnostic trouble code memory by using the Special Service Tool (SST) New Generation Star (NGS).





2. Remove the SST (NGS) from the data link connector-2.
3. Drive the vehicle at 50 km/h (31 mph), and depress the accelerator pedal fully to activate kickdown.





Stop the vehicle gradually.
4. Connect the SST (NGS) to the data link connector-2 and battery.
5. Turn the ignition switch to ON.
6. Verify that no diagnostic trouble codes are displayed.
7. Remove the SST from the data link connector-2.