Transmission Temperature Sensor/Switch: Service and Repair

Transaxle Fluid Temperature Sensor Removal/Installation [GF4A-EL]
1. Remove the control valve body cover.
2. Disconnect the transaxle fluid temperature sensor connector.





3. Remove the transaxle fluid temperature sensor using the SST.
4. Install a new transaxle fluid temperature sensor using the SST.
Tightening torque 7.9 - 10.7 Nm (80 - 110 kgf-cm, 69.5 - 95.4 inch lbs.)
5. Connect the transaxle fluid temperature sensor connector.
6. Install the control valve body cover.