Steering Column Relay: Service and Repair

TILT RELAY REMOVAL/INSTALLATION
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.

TILT RELAY INSPECTION
Continuity Inspection
- Disconnect and inspect the connectors between the tilt relay to the circuit breaker, CPU, tilt motor, and ground.

Auto-tilt Steering Column Tilt-up Condition





1. While connecting battery positive terminal to terminal D, and battery negative terminal to B, inspect continuity between terminal H and terminal A of the tilt relay side connector.





2. If not as specified, replace the tilt relay.

Auto-tilt Steering Column Tilt-down Condition





1. While connecting battery positive terminal to terminal D, and battery negative terminal to terminal J. check for continuity between terminal H and terminal I of the tilt relay side connector.
2. If not as specified, replace the tilt relay.

Tilt Relay OFF Condition, UP Side
1. Inspect continuity between terminal A and terminal C of the tilt relay side connector.





2. If there is no continuity, replace the tilt relay.

Tilt Relay OFF Condition, DOWN Side
1. Inspect continuity between terminal I and terminal C of the tilt relay side connector.





2. If there is no continuity, replace the tilt relay.