DTCs Procedure On-Board Diagnostic Test

READING DTCs PROCEDURE




1. Perform the necessary vehicle preparation and visual inspection. Hook-up the SST (NGS tester) to the vehicle.




2. Move the cursor to VEHICLE AND ENGINE SELECTION.




3. Move the cursor to SELECT NEW VEHICLE YEAR & MODEL. Press the trigger key to enter this selection.




4. Move the cursor to 1999 - VIN #1O:X. Press the trigger key to enter this selection.
5. Move the cursor to appropriate model. Press the trigger key to enter this selection.




6. The vehicle selection screen showing the selected vehicle will be displayed. Move the cursor to the vehicle selected. Press the trigger key.




7. Move the cursor to DIAGNOSTIC DATA LINK in the main menu screen. Press the trigger key to enter into menu system diagnostics.




8. Move the cursor to ABS-ANTI LOCK BRAKE MODULE. Press the trigger.




9. Move the cursor to DIAGNOSTIC TEST MODE.
10. Move the cursor to READ/CLEAR DIAGNOSTIC TEST RESULTS. Press the trigger key to enter this selection.
11. Press START.
12. If the system is normal, SYSTEM PASSED. (NO DTCS AVAILABLE) will be indicated. If any DTC is indicated, follow the appropriate DTC troubleshooting chart.
13. After completion of repairs, clear DTCs.