New Generation Star Tester Hook-Up Procedure

NOTE: Make sure that ignition switch is at OFF.

1. Insert the vehicle interface module and program card into the SST (NGS tester) control unit.




2. Plug the NGS OBD II adapter into the interface module and the connector into the vehicle data link connector (DLC) located under the dash to left of the steering shaft.
3. Plug the SST (NGS tester) power cable into the cigarette lighter or use a battery hook-up adapter.
4. Listen for a double beep. The SST (NGS tester) is now initialized. Begin the functional test of ABS/TCS.