Fuel Tank Disassembly and Assembly
FUEL TANK DISASSEMBLY AND ASSEMBLYDisassembly
Follow procedure shown in diagram.
Reassembly
Reverse procedure, note the following:
- Push the ends of the evaporative hoses onto the respective fittings at least 20 mm (0.79 in).
- Stick pad A onto the fuel tank, over the harness and the evaporative pipe as shown.
- Stick pad B and C onto the fuel tank as shown. (Upper surface of the fuel tank is projected for installation of pad C.)
- Be sure the hoses are not bent or twisted.