Cylinder Head Bolts

1. Before installation, measure the length of each bolt. Replace any that exceed the maximum length.
- Standard (New): 99.2-99.8 mm (3.91-3.92 inch).
- Maximum: 100.5 mm (3.957 inch).
2. Tighten the cylinder head bolts in two or three steps in the order shown to achieve a final torque of 17.2-22.0 Nm (12.7-16.2 ft. lbs.).





3. Put a paint mark on each bolt head.





4. Using the marks as a reference, tighten the bolts by turning each 85°- 95° in the sequence shown.
5. Further tighten each bolt by turning another 85°- 95° in the sequence shown.