Stall Test

1. Shift the selector lever to D range.

CAUTION: If the accelerator pedal is pressed for longer than 5 seconds while the brake pedal is pressed, the transaxle could be damaged. Therefore, do steps 2 and 3 within 5 seconds of each other.

2. Firmly depress the brake pedal with the left foot, and then gradually depress the accelerator pedal with the right.
3. When the engine speed no longer increases, quickly read the engine speed and release the accelerator.
4. Shift the selector to neutral and let the engine idle for 1 minute or more to cool the ATF.
5. Perform stall tests for the remaining ranges in the same manner. Engine stall speed is 2,270 - 2,500 rpm.
a. S range (non-HOLD), S range (HOLD)
b. L range (non-HOLD), L range (HOLD)
c. R position