Front
1. Disconnect from harness.
2. Remove mounting hardware.
3. Install in reverse order, noting the following:
^ Tighten mounting bolts to 19-25 Nm (14-18 ft. lbs.).
^ Tighten mounting nuts to 7.9-10.7 Nm (70-95 inch lbs.).
1. Disconnect from harness.
2. Remove mounting hardware.
3. Install in reverse order, noting the following:
^ Tighten mounting bolts to 19-25 Nm (14-18 ft. lbs.).
^ Tighten mounting nuts to 7.9-10.7 Nm (70-95 inch lbs.).