Stall Test

1. Shift the selector lever to R position.

CAUTION: If the accelerator pedal is pressed for longer than 5 seconds while the brake pedal is pressed, the transmission could be damaged. Therefore, do steps 2 and 3 within 5 seconds of each other.

2. Firmly depress the foot brake with the left foot, and gently depress the accelerator pedal with the right.
3. When the engine speed no longer increases, quickly read the engine speed and release the accelerator.
4. Shift the selector lever to N position and let the engine idle for one minute or more to cool the ATF.
5. Perform the stall test for the following ranges in the same manner. Engine stall speed should be within 2,750 - 3,150 rpm.
a. D range
b. S range
c. L range