Throttle Full Close Switch: Adjustments

Adjustment
1. Check that the throttle valve is in the closed throttle position.
2. Disconnect the throttle position sensor connector.
3. Loosen the throttle position sensor screws.







4. Rotate the throttle position sensor and adjust continuity between the sensor terminals A and B as shown.
5. Tighten the throttle position sensor screws.

Tightening torque: 1.6-2.3 Nm (14-20 in.lbs.)

6. Tighten the attaching screws.
7. If not adjusted to specifications, inspect the throttle position sensor harness.
8. If the harness is OK, replace the throttle position sensor.