Cruise Control Module: Testing and Inspection

Crusie Control Module Inspection

1. Remove the passenger's side front side trim.
2. Remove the cruise control module without disconnecting the connector.
3. Measure the voltage at the cruise control module terminals as indicated below.
4. Disconnect the cruise control module connector before checking for continuity at terminal 1.
5. If not as specified, inspect the parts listed under "Inspection area" and the related wiring harnesses.
6. If the pants and wiring harnesses are okay but the system still does not work properly, replace the cruise control module.

Chart 1 Of 2:

Chart 2 Of 2:

Terminal Voltage List (Reference)