Inspection of Diagnostic Trouble Codes/Operation Mode

USING THE CRUISE SET INDICATOR LIGHT

NOTE: If an Operation Mode is not indicated, the following may be the cause of the malfunction.
- RESUME/ACCEL switch
- Cruise control main switch
- Cruise control module
- Open or short circuit in wiring harness

1. Turn the ignition switch to ON.
2. Verify that the cruise control main switch is off.




3. Turn and hold the RESUME/ACCEL switch then press the cruise control main switch to activate system inspection. (The cruise set indicator light will illuminate.)




4. Operate each switch as described and note the operation code list pattern. If the cruise set indicator light does not flash, inspect the corresponding system area.
5. The Operation Mode is canceled by turning the ignition switch to LOCK or turning off the cruise control main switch.