No. 2 Power Window at Driver's Door Does Not Move

Flowchart No. 2 Symptom Power window at driver's door does not move

Possible cause
^ Damaged power window main switch assembly
^ Damaged power window regulator
^ Open or short circuit in wiring harness Poor connection of connector

Voltmeter Connection:

Reference:

Step 1
1. Remove the driver's door trim.
2. Turn the ignition switch to ON.
3. Measure the voltage at the terminal wires of the main switch assembly connector with the driver's main switch in the following positions.
4. If correct, go to Step 2.
5. If not as specified, check the power window main switch assembly.

Voltmeter Connection:

Reference:

Step 2
1. Remove the driver's door screen.
2. Measure the voltage at the terminal wires of the regulator connector with the driver's main switch in the following positions.
3. If correct, check the power window regulator.
4. If not as specified, repair the wiring harness (main switch assembly-regulator).