No. 3 Power Door Locks at One Door Does Not Operate W/O Keyless

Flowchart No. 3 Symptom Power door lock system at specific door does not function (without keyless entry system)

Possible cause
^ Damaged door lock actuator
^ Open or short circuit in wiring harness Poor connection of connector

Remedy
1. Remove the door trim and door screen.

Voltmeter Connection:

Reference:

2. Measure the voltage at the terminal wires of the door lock actuator connector with the driver's door lock knob in the following positions.
3. If correct, check the door lock actuator.
4. If not as specified, repair the wiring harness (door lock timer unit-door lock actuator).