Torque Specifications

Intake:

Exhaust:

Upper Engine:

Head Torque Sequence:

1. Before installation, measure the length of each bolt. Replace any that exceed the maximum length.
Length: 99.2-99.8 mm ( 3.91-3.92 in )
Maximum: 100.5 mm ( 3.957 in )
2. Tighten the cylinder head bolts in two or three steps in the order shown.
Tightening torque: 17.2-22.0 Nm ( 12.7-16.2 ft-lbf )
3. Put a paint mark on each bolt head.
4. Using the marks as a reference, tighten the bolts by turning each 85°-95° in the sequence shown.
5. Further tighten each bolt by turning another 85°-95° in the sequence shown.

Cam Cap Torque/Sequence:

Timing Components:

Lower Engine:

Torque Sequence: