Shift Mechanism

1. Disassemble in the order shown in the image.
2. Assemble in the reverse order of disassembly, referring to Assembly Note.




1. Shift lever knob
2. Front console
3. Insulator
4. Transverse member
5. Exhaust pipe
6. Nut
7. Bolt
8. Nut
9. Bolt
10. Change control rod
11. Bushings
12. Bushings
13. Nut
14. Washer
15. Washer
16. Nuts (base plate)
17. Assist boot
18. Mounting rubber boot
19. Retaining ring
20. O-ring
21. Upper ball seat
22. Boot
23. Lower ball seat
24. Gear shift lever
25. Pipe
26. Bushing
27. Extension bar
28. Nut
29. Bolt
30. Rubber mount
31. Base plate




Assembly Note
Nuts (base plate)
1. Install the base plate to the floor; then install the extension bar onto the transaxle.

Tightening torque: 38-51 N.m (3.8-5.3 kgf.m, 28-38 ft.lbf)

2. Tighten the base plate nuts to the specified torque.

Tightening torque: 9.8-14.7 N.m (100-150 kgf.cm, 87-130 in.lbf)