One Way Clutch

One Way Clutch






DISASSEMBLY
1. Disassemble as shown in the illustration.
2. Inspect all parts and repair or replace as necessary.

ASSEMBLY
- Assemble in the reverse order of disassembly, referring to following steps:

NOTE: The outer tabs of the roller assembly must be facing up.





1. Install the roller assembly into the outer race.

CAUTION: Inner race groove must be face up.





2. Install the inner race with the groove facing up, using clockwise rotating motion.





3. Check the operation of the low one-way clutch as follows:
^ When the inner race is rotated in a clockwise direction, it should move freely.
^ When the inner race is rotated in a counterclockwise direction, it should lock to the outer race.