Transmission Temperature Sensor/Switch: Testing and Inspection

Inspection
1. Remove the control valve body.
2. Remove the transmission fluid temperature sensor and solenoid valve(s).
3. Place the transmission fluid temperature sensor in water with a thermometer as shown and heat the water gradually.
4. Measure resistance between the terminals of the thermosensor.




5. If not correct, replace the transmission fluid temperature sensor.
6. Install the transmission fluid temperature sensor and solenoid valve(s).

Tightening Torque: 6.9-8.8 N-m (61-78 in-lb)

7. Install the control valve body.