Transmission Speed Sensor: Service and Repair

View: Output Speed Sensor:

Replacement
1. Disconnect the negative battery cable.
2. Remove the battery.
3. Disconnect the output speed sensor connector.
4. Remove the splash shield.
5. Remove output speed sensor.
6. Apply ATF to a new 0-ring and install it on output speed sensor.
7. Install the new output speed sensor.

Tightening Torque: 5.0-6.8 N-m (44-60 in-lb)

8. Install the splash shield.
9. Connect the output speed sensor connection
10. Install the battery.
11. Connect the negative battery cable.