With OEM Scan Tool

Preparation

Inspection
1. Connect the SST-New Generation Star Tester (NGS) to the data link connector-2.




2. Refer to the manufacturer-provided instruction manual for the NGS operation.




3. Select DIAGNOSTIC TEST MODES function and press trigger.
4. When "NO CODES RECEIVED/SYSTEM PASSED" is displayed, all systems monitored are judged OK.
5. When any of the diagnostic trouble codes are displayed, carry out troubleshooting according to the related trouble code charts.
Testing and Inspection
6. When "LINK MONITOR ERROR" is displayed, check connection of the NGS.
7. To clear codes after all problems have been repaired, carry out "After Repair Procedure."

After Repair Procedure
1. After repairs, Connect the NGS to the data link connector-2.




2. Select CLEAR DIAGNOSIS CODES function and erase diagnostic trouble codes from the NGS memory.
3. Perform diagnostic trouble code inspection again and verify that no diagnostic trouble codes are displayed.