Manual Trans.

REMOVAL/INSPECTION/INSTALLATION
1. Remove in the order shown in the figure.
2. Inspect the intake air system components and repair or replace them as necessary.
3. Install in the reverse order of removal referring to "Installation Note".




1. Fresh air duct
Inspect for damage
2. Air cleaner
Inspect for excessive dirt and damage
3. Air cleaner element
Inspection
4. Mass air flow sensor
Inspection
5. Air hose
Inspect for damage
6. Resonance chamber Inspect for damage
Inspect for damage
Installation note
7. Accelerator cable
Inspection/Adjustment
8. Throttle body
Inspection
9. BAC valve
Inspection
10. [1][2]Intake manifold bracket
11. [1][2]Intake manifold




Installation Note ([1][2]Intake Manifold)
1. Tighten the bolts in the order shown in the figure.

Tightening torque: 19-25 N-m (14-18 ft-lb)

2. Refill the radiator with the specified engine coolant.
3. Check for engine coolant leakage.