Manual Trans. - California Only
Removal/Inspection/Installation1. Remove in the order shown in the figure.
2. Inspect all parts and repair or replace as necessary.
3. Install in the reverse order of removal.
1. Main silencer
Inspect for deterioration and restriction
2. Pre-silencer
Inspect for deterioration and restriction
3. Three way catalytic converter
Inspect for deterioration and restriction
4. Front pipe assembly
Inspect for deterioration and restriction
5. Warm up three way catalytic converter (California)
Inspect for deterioration and restriction
6. Exhaust manifold insulator
7. Exhaust manifold
Inspect for deterioration and cracks
8. Heated oxygen sensor
Inspection