Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

With Manual Transaxle (MTX)


PURPOSE
The heart of the engine control system is the engine control module (ECM).
The ECM receives input signals from a series of sensors, makes computations based on these inputs, and sends (output) signals to various devices which control functions such as air/fuel mixture, ignition timing, and certain emission control devices.

OPERATION
The ECM sends out a regulated, 5 volt reference voltage (VREF) to the input sensors. These sensors require a constant VREF source to provide an accurate signal. The ECM monitors the signals from these sensors and calculates the proper operating strategy for the engine operating conditions.


ECM INPUTS
- A/C operation (A/C sensor)
- Air/Fuel ratio (Heated oxygen sensor)
- Barometric absolute pressure (Barometric pressure sensor)
- Braking signal (Brake switch)
- Cranking signal (ignition switch "START" position)
- E/L operation (Electric load from accessory circuits)
- Engine coolant temperature sensor
- Engine speed (Camshaft position sensor-SGT signal)
- Manual transaxle in-gear condition (Neutral and clutch switches)
- Intake air amount (Mass air flow sensor)
- Intake air temperature (Intake air temperature sensor)
- No.1 piston @ TDC (Camshaft position sensor-SGC signal)
- Initial set signal (Data link connector TEN terminal)
- Power steering operation (Power steering pressure switch)
- Throttle valve opening angle (Throttle position sensor)
- Vehicle speed sensor

ECM OUTPUTS
- A/C cut-off (A/C relay)
- Coolant fan control (coolant fan relay)
- Data link connector (monitor function, output to self diagnosis checker)
- EGR control system (EGR solenoid valves)
- Fail-safe function (Self diagnosis checker and malfunction indicator lamp)
- Fuel pump control (fuel pump relay)
- Fuel injection system (Fuel injectors)
- Idle speed control (Idle speed control system)
- Ignition timing control (Ignition timing control system-Ignition control module)
- Purge control system (Purge solenoid valve)
- Variable inertia charging (VICS) system (VICS solenoid valves)
- Pressure regulator control (PRC) system (PRC solenoid valves)