Output Gear Disassembly/Assembly

OUTPUT GEAR DISASSEMBLY/ASSEMBLY
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly indicated in the table.





Bearings disassembly note
^ Remove the bearings from the output gear by using the SST





Assembly procedure
1. Press the new bearings onto the output gear by using the SST





Note
^ Do not damage the seal ring when installing it.

2. Apply ATF to new seal rings and install them to each side of the output gear.

Seal ring inner diameter
27.6 mm (1.087 in)