Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

With Automatic Transaxle (ATX)

PURPOSE
The heart of the engine control system is the powertrain control module engine (PCME).
The PCME receives input signals from a series of sensors, makes computations based on these inputs, and sends (output) signals to various devices which control functions such as air/fuel mixture, ignition timing, and certain emission control devices. On automatic transaxle (ATX) equipped vehicles, the PCME also receives inputs from the powertrain control module, transaxle (PCMT).

PCME INPUTS
- A/C operation (A/C sensor)
- Air/Fuel ratio (Heated oxygen sensor)
- Barometric absolute pressure (Barometric absolute pressure sensor)
- Braking signal (Stop light switch)
- Cranking signal (ignition switch "START" position)
- E/L operation (Electric load from accessory circuits)
- Engine coolant temperature sensor
- Engine speed (Crankshaft position sensor-SGT signal)
- Automatic transaxle in-gear condition (Park/neutral switch)
- Transaxle operating signals (from powertrain control module transaxle)
- Intake air amount (Mass air flow sensor)
- Intake air temperature (Intake air temperature sensor)
- No.1 piston @ TDC (Crankshaft position sensor-SGC signal)
- Initial set signal (Data link connector TEN terminal)
- Power steering operation (Steering pressure sensor)
- Throttle valve opening angle (Throttle position sensor)
- Vehicle speed sensor (signal buffer)

PCME OUTPUTS
- A/C cut-off (A/C relay)
- Fail-safe function (Self diagnosis checker and malfunction indicator light)
- Fuel injection system (Fuel injectors)
- Fuel pump control (fuel pump relay)
- Idle speed control (Idle speed control system)
- Ignition timing control (Ignition timing control system-igniter)
- Data link connector (monitor function, output to self diagnosis checker)
- Purge control system (Purge solenoid valve)
- Torque reduced signal/ coolant temperature signal (to powertrain control module transaxle, for ATX)
- EGR control system (EGR solenoid valves)
- Variable inertia charging (VICS) system (VICS solenoid valves)
- Pressure regulator control (PRC) system (PRC solenoid valves)