Front

Fig. 90 Front Wheel Speed Sensor Rotor Replace:

1. Set park brake, block rear wheels, then raise and support front of vehicle.
2. Remove front wheel and tire, then remove cap from hub.
3. Remove locknut from spindle, then remove the driveshaft, Fig. 90.
4. Tap sensor rotor from driveshaft using a chisel.
5. Install sensor rotor by pressing on, using the SST.
6. Replace driveshaft, then install locknut. Torque to 174-235 ft. lbs.
7. Replace cap onto hub, then install wheel and tire.
8. Remove blocks from rear wheels, then release park brake.