Hood Latch Release: Service and Repair

Hood Latch Release Handle










Hood Latch Release Cable Routing




Removal and Installation

1. Remove the LH headlamp.

2. Remove the hood latch. For additional information, refer to Hood Latch Service and Repair.

3. Remove the battery tray.

4. Release the hood latch release cable routing clips.

5. Remove the steering column cover.

6. Remove the hood latch release handle bolt.
- To install, tighten to 2 Nm (18 lb-in).

7. Disconnect the hood latch release cable from the handle.

8. Remove the hood latch release cable.
- Pull the hood latch release cable through the cowl panel into the engine compartment.

9. To install, reverse the removal procedure.