Test S: The Heated Seat Is Inoperative - Right Rear, Does Not Operate In High

PINPOINT TEST S: THE HEATED SEAT IS INOPERATIVE - RIGHT REAR, DOES NOT OPERATE IN HIGH

Normal Operation
The right rear heated seat module receives voltage feed on circuit 1445 (RD/LG), ignition voltage feed on circuit 1040 (RD/BK) and is supplied ground on circuit 57 (BK). When the heated seat control switch is pressed with the ignition switch in RUN or START, a ground signal is sent to the heated seat module on circuit 581 (RD) to command the system ON or OFF (HIGH heat mode).

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Heated seat switch
- Heated seat module

S1-S3:

S3 Continued: