Rear Door Window Regulator: Service and Repair

WINDOW REGULATOR AND MOTOR - REAR DOOR

Exploded View

Part 1:

Part 2:

Removal and Installation
1. Remove the rear door window glass.
2. Remove the 4 rivets and the pull handle retainer bracket.
3. Remove the rear door window regulator nuts.
- To install, tighten to 12 Nm (9 lb-ft).

4. Disconnect the rear door window regulator motor electrical connector.
5. Remove the 5 rear door window regulator rivets.
6. Remove the rear door window regulator and motor.
7. To install, reverse the removal procedure.