Crankshaft, Engine
CrankshaftMain bearing journal diameter 67.483-67.503 mm (2.6568-2.6576 in)
Main bearing journal maximum taper 0.004 mm (0.0002 in)
Main bearing journal maximum-out-of-round 0.0075 mm (0.0003 in) between cross sections
Main bearing journal-to-cylinder block 0.066-0.024 mm (0.0259-0.0009 in)
Connecting rod journal clearance 53.003-52.983 mm diameter (2.0867-2.0859 in)
Connecting rod journal maximum taper (straightness) 0.004 mm (0.0002 in)
Connecting rod journal maximum-out-of-round 0.0075 mm (0.0003 in) between cross sections
Main bearing bore inside diameter 72.40-72.424 mm (2.8504-2.8513 in)
Crankshaft maximum end play 0.301 mm (0.0118 in)
Main Bearing Cap Jackscrews
Stage 1 5 Nm (44 lb-in).
Stage 2 10 Nm (89 lb-in).
Main Bearing Cap Side Bolts
Discard the bolts.
Stage 1 10 Nm (89 lb-in).
Stage 2 21 Nm (15 lb-ft).
Main Bearing Cap Lower Bolts
Discard the bolts.
Stage 1 40 Nm (30 lb-ft).
Stage 2 Tighten an additional 90°
Crankshaft Main Bearing Codes
