Power Seat Switch: Service and Repair
LUMBAR CONTROL SWITCHExploded View
Front Seat Backrest (Part 1):
Front Seat Backrest (Part 2):
Front Seat Cushion (Part 1):
Front Seat Cushion (Part 2):
Removal
1. Remove the affected seat.
2. Release the seat cushion cover J-clips to access the lumbar switch.
3. Disconnect the power lumbar switch electrical connector.
4. Insert a screwdriver between the bezel and the power lumbar switch and pry the tab, pushing the switch through the bezel.
5. Remove the power lumbar switch.
Installation
1. Install the power lumbar switch until seated into the bezel.
2. Connect the power lumbar switch electrical connector.
3. Position the seat cushion trim cover back and fasten the J-clips.
4. Install the affected seat.