Test H: Easy Exit/Easy Entry Does Not Operate Correctly
PINPOINT TEST H: EASY EXIT/EASY ENTRY DOES NOT OPERATE CORRECTLYNormal Operation
The easy exit function moves the seat backwards about 51 mm (2 in) when the ignition key is removed from the ignition switch. The driver seat module (DSM) receives a key out command over the standard corporate protocol (SCP) communication network and powers the driver seat rearward. This function will not operate if the seat is less than the travel distance to the end of the track or the function has been deactivated. The DSM will also cancel this operation if a valid input command is received, such as the seat control switch or memory recall request.
The DSM will record the current seat position before powering the seat for an easy exit function. This recorded position will be used to return the seat to this position on the easy entry operation. During easy entry operation, the seat is returned to the position previous to the easy exit operation. Easy entry operation will be cancelled if a valid input command is received by the DSM.
This pinpoint test is intended to diagnose the following:
- Driver seat
- Easy entry/exit feature is not enabled
- Missing status information (network communication bus messages) to the DSM:
- ignition switch position
- transmission range (TR)
- DSM
