Test H: The Keyless Entry Keypad Illumination Is Inoperative/Does Not Operate Correctly

TEST H: THE KEYLESS ENTRY KEYPAD ILLUMINATION IS INOPERATIVE/DOES NOT OPERATE CORRECTLY

Normal Operation
When the driver door module (DDM) detects a keyless entry keypad button is pressed, the DDM supplies ground to the keyless entry keypad on circuit 66 (LB). The keypad receives voltage through circuit 1524 (DB).

This pinpoint test is intended to diagnose the following:
- Fuse
- Wiring, terminals or connectors
- Keyless entry keypad
- DDM

H1-H2:

H3-H6:

H6-H7: