Luggage Compartment Lid Closing Motor

LUGGAGE COMPARTMENT LID CLOSING MOTOR







Removal and Installation
1. Remove the 2 pin-type retainers and the scuff plate.
2. Disconnect the 2 luggage compartment lid closing motor electrical connectors.
3. Remove the 3 bolts and the luggage compartment lid closing motor.
- To install, tighten to 10 Nm (89 lb-in).

4. To install, reverse the removal procedure.
- Carry out the initialization procedure. For additional information, refer to Luggage Compartment Lid Motor Initialization. Programming and Relearning