Accelerator Pedal and Bracket

ACCELERATOR PEDAL AND BRACKET

Adjustable Accelerator Pedal And Bracket Without Memory:

Adjustable Accelerator Pedal And Bracket With Memory:

Removal
1. Disconnect the battery ground cable.
2. Disconnect the accelerator pedal sensor electrical connector.
3. Disconnect the accelerator pedal motor electrical connector.
4. Disconnect the accelerator pedal motor drive cable connector.
5. Remove the 3 accelerator pedal and bracket retaining nuts.
6. Remove the accelerator pedal and bracket assembly.

Installation
1. Install the accelerator pedal and bracket assembly.
2. Install the 3 accelerator pedal and bracket retaining nuts. Tighten nuts to 9 Nm (80 lb-in).
3. Connect the accelerator pedal motor drive cable connector.
4. Connect the accelerator pedal motor electrical connector.
5. Connect the accelerator pedal sensor electrical connector.
6. Connect the battery ground cable.
7. Index the adjustable accelerator pedal and bracket assembly.