Selector Lever Knob

Selector Lever Knob - 3.5L

Selector Lever Knob - 3.5L (Part 1):

Selector Lever Knob - 3.5L (Part 2):

Removal
All vehicles
1. Remove the PRNDL trim ring.





2. Remove the upper console panel.





3. Slide the lower shift knob bezel downward.





4. Remove the 2 bolts from the selector lever knob.





Vehicles equipped with a light bulb
5. Disconnect the light from the PRNDL bezel.





Vehicles equipped with LED illumination
6. Disconnect the LED electrical connector.





Vehicles equipped with a transmission control (TC) switch
7. Disconnect the TC switch electrical connector and remove the wiring harness retainer from the selector lever housing.





All vehicles

8. NOTE: Selector lever removed for clarity.

Release the 3 tabs and remove the PRNDL bezel, selector lever knob and knob bezel.





Installation
Vehicles equipped with a TC switch

1. NOTE: Selector lever removed for clarity.

Position the TC switch wiring harness through the selector lever knob bezel and the PRNDL bezel and install the PRNDL bezel on the selector lever.
- Make sure that the 3 locking tabs are locked in place.





2. Connect the TC switch electrical connector and install the connector fastener on the selector lever housing.





Vehicles equipped with LED illumination
3. Connect the LED electrical connector.





Vehicles equipped with a light bulb
4. Connect the light to the PRNDL bezel.





All vehicles
5. Position the lower shift knob bezel in place.





6. Position the shift knob in place and install the bolts.





7. Slide the lower shift knob bezel up and snap it into place.





8. Install the upper console panel.





9. Install the PRNDL trim ring.