Shifter A/T: Service and Repair

Transmission Selector Lever





Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Place the range selector lever in the D5 position.
3. Remove the center console.





4. Remove the handle and cover.
1 Slide the cover down.
2 Remove the 2 screws.
3 Remove the handle and the cover.





5. Move the shifter bezel aside.





6. Remove the PRNDL indicator bulb from the electrical connector.





7. Disconnect the cable from the lever.
1 Remove the shift interlock cable from the bracket.
2 Disconnect the cable from the lever.





8. Disconnect the transmission shift cable from the shifter assembly.





9. Disconnect the 2 electrical connectors from the shifter assembly.





10. Remove the 4 screws from the shift lever assembly base.
^ To install, tighten to 7 Nm (62 inch lbs.).

11. NOTE: A selector lever cable adjustment must be carried out after installation.

To install, reverse the removal procedure.