Roof Opening Panel Shield
ROOF OPENING PANEL SHIELDRemoval
1. Remove the roof opening glass assembly.
2. Remove the 2 screws and the water trough.
3. Pull the roof opening panel opening shield forward, lifting up slightly at the front openings until the front and rear tabs are disengaged from the track.
Installation
1. Insert the rear tabs into the track and slide the roof opening panel shield rearward until the front tabs insert into the track.
2. Install the water trough under the tab on each side.
3. Position the water trough and install the 2 screws.
4. Install the roof opening glass assembly.