Front Door Window Glass: Service and Repair

FRONT DOOR WINDOW GLASS

Heavy Duty Riveter:

SPECIAL TOOL(S)

REMOVAL
1. Remove the front door trim panel.







2. Remove the screws and the speaker.







3. If equipped, remove the two screws and position the driver door module (DDM) aside.
4. Position the watershield aside.







5. Remove the interior weatherstrip.
6. Connect the battery.







7. Connect the window control switch electrical connectors.
8. Lower the door window glass to gain access to the rivets.







9. CAUTION: Prior to removing the rivet center pins, it is necessary to place a suitable block support between the door outer panel and the door window channel bracket to stabilize the door window glass during rivet removal.

Remove the rivets.

10. Remove the front door window glass.

INSTALLATION
1. To install, reverse the removal procedure.
- Using the special tool, install the new rivets.