Front Door Window Motor: Service and Repair

FRONT DOOR WINDOW REGULATOR MOTOR

Heavy Duty Riveter:

SPECIAL TOOL(S)

REMOVAL
1. Remove the front door window glass.







2. Remove the rivets and the front door latch remote control.
- Disconnect the actuator rod.







3. Disconnect the electrical connector.







4. Remove the front door window regulator motor screws.







5. NOTE: The window motor and regulator assembly is shown removed from the vehicle.

Remove the front door window regulator motor.
- Partially separate the front door window regulator motor from the regulator, then press the release tab on the regulator and remove the front door window regulator motor.

INSTALLATION
1. To install, reverse the removal procedure.
- Using the special tool, install the rivets.