Lighting Control (LCM) Module

MODULE - LIGHTING CONTROL (LCM)

REMOVAL

1. CAUTION: Prior to removal of module, it is necessary to upload module configuration information to a diagnostic tool. This information needs to be downloaded into the new module once installed.

Disconnect the battery ground cable.







2. Remove the LH instrument panel lower insulator.
1 Remove the pin-type retainers.
2 Disconnect the courtesy lamp.

3. Remove the accelerator pedal and shaft.







4. Position the LCM aside.
1 Remove the screws.
2 Release the locking tab.







5. Disconnect the electrical connectors and remove the LCM.

INSTALLATION

1. CAUTION: Once the new module is installed, it is necessary to download the module configuration information from the diagnostic tool into the new module.

To install, reverse the removal procedure.