Front Door Latch: Service and Repair
FRONT DOOR LATCHHeavy Duty Riveter:
SPECIAL TOOL(S)
REMOVAL
1. Remove the front door trim panel.
2. Position the watershield aside.
3. Remove the door lock actuator rivet.
4. Disconnect the door lock actuator electrical connector.
5. Remove the rivets and position the door latch remote control aside.
6. Disconnect the exterior door handle actuating rod.
- Open the clip.
7. If equipped, disconnect the door lock cylinder rod.
8. Disconnect the door ajar switch.
9. Remove the screws and the door latch, linkage, and lock actuator as an assembly.
INSTALLATION
1. To install, reverse the removal procedure.
- Transfer the parts as necessary.