Audio Unit Self-Diagnostic Mode

AUDIO UNIT SELF-DIAGNOSTIC MODE

NOTE: To enter the speaker walk-around test or audio unit self-diagnostic mode, the audio unit must be turned on and in tuner mode (AM/FM1/FM2).

1. The audio unit self-diagnostic mode has six tests available:
- Preset button 1 = Audio internal/external SELF TEST. This test is an on-demand self-test. If SELF FAIL is displayed, press TUNE > to scroll view the diagnostic trouble codes (DTCs) stored. Refer to the Audio Unit Diagnostic Trouble Code (DTC) Index. If the system is OK, SELF PASS will be displayed. Audio Unit Diagnostic Trouble Code (DTC) Index
- Preset button 2 = View/Clear continuous DTCs. NO DTCs is displayed if no DTCs are retrieved. If DTCs FOUND is displayed, press TUNE > to view the DTCs retrieved. Refer to the Audio Unit Diagnostic Trouble Code (DTC) Index. To clear all DTCs, press the EJECT button. DTCs CLEAR will be displayed. Audio Unit Diagnostic Trouble Code (DTC) Index
- Preset button 3 = SIGNAL TEST. This test measures the average strength at the current tuner setting.
- Preset button 4 = Software configuration level. This test queries each radio system controller for its software configuration level. SOFT LEVELS will be displayed upon completion of the query. Press TUNE > to scroll view the software configuration version level.
- Preset button 5 = DISPLAY TEST. This test will light all the Dual Media Audio Unit display segments for 5 seconds. When the test is complete, DISPLAY TEST is displayed on the bezel.
- Preset button 6 = RADIO CONFIGURATION TEST. While in diagnostic mode, press Preset 6. "RADIO CONFIG" will be displayed. Now press TUNE >. If the EQ download (at supplier plant) option and tuner configuration is not complete, then "NO CONFIG" will be displayed. If EQ download option and tuner configuration is done correctly, then Config 1 (options), Config 2 (tuner setting) and EQ ID (identifier for EQ file downloaded) will be displayed.

2 To enter these tests, press the desired preset button while in the speaker walk-around test or while in the self-diagnostic mode.
3. To exit the self-diagnostic mode, turn the ignition switch or the audio unit off.