Vehicle Damage Warnings
CAUTION:- Care must be taken to avoid scratching the pinch weld.
- After installing the new urethane-installed rear window glass, the vehicle should not be driven until the urethane adhesive has cured. The curing time at temperatures above 13°C (55° F) and relative humidity above 50% is 12-24 hours. (Refer to the Essex drive away chart for the cure times as the temperatures and humidity vary). Inadequate curing of the urethane adhesive may adversely affect the strength of the urethane adhesive bond.
- Wipe off the urethane glass prep immediately after each application because it flash dries. Apply deliberate strokes, making sure not to overlap the applied area.
- Open the windows to prevent the rear window glass from being pushed out by air pressure if a door is closed.