System Specifications

The cylinder head bolts are a torque-to-yield design and must not be reused.
Stage 1 20 Nm (15 ft. lbs.)
Stage 2 35 Nm (26 ft. lbs.)
Stage 3 45 Nm (33 ft. lbs.) and 90°
Stage 4 90°

Cylinder head gasket surface flatness 0.08 mm

Torque Sequence:

Intake Manifold 20 Nm (15 ft. lbs.)

LH:

RH:

Bearing Cap Torque and Sequence
Stage 1 Hand-tighten
Stage 2 6 Nm (53 in. lbs.)
Stage 3 90°

Camshaft Sprocket
Stage 1 20 Nm (15 ft. lbs.)
Stage 2 90°

Right Side:

Left Side:

Exhaust Manifold 25 Nm (18 ft. lbs.)


Valves

Part 1 Of 2:

Part 2 Of 2: