Front Door Panel: Service and Repair

FRONT DOOR TRIM PANEL

REMOVAL
1. Disconnect the battery.







2. To remove individual components only, carry out the listed steps.







3. Remove the components in the order indicated in the illustration and table.

Item 1: Window Regulator Control Switch Panel Removal Note
1. Disconnect the electrical connectors.

Item 2: Screw Cover Removal Note
1. From the top of the cover on center, use a suitable tool, insert 2-3 mm and rotate to disengage the snap feature.

Item 7: Front Door Trim Panel Removal Note
1. Disconnect the door lock control switch electrical connector.
2. If equipped, disconnect the driver seat memory switch electrical connector.

INSTALLATION
1. To install, reverse the removal procedure.